www.creationmodel.net/index.php/infinity-1-8/infinity-if11-formula1-car
Looks a little different.
creationmodel.net
Is this a scale model car or a racing car? Does it just look cool or does it run well too?INFINITY has a new product that says "yes" to all these.INFINITY has created the IF11 to awaken your passion f...
Very interesting car. I’m curious if that reinforcement up front is to further chassis stiffness to try and get the car even more agressive.
Breaking news!!
New Micro High Speed Servo for the Jomurema 1/28 Car has been released!!New Micro High Speed Servo release
500280 DG280 Delrin Gear Servo
500320 MG320 Metal Gear Servo
GREAT NEWS!!
The decision has been made to race this Sunday, August 12th!!
With the excitement around the new Jomurema 1/28th car bringing new racers out to participate this Fall, we wanted to give everyone the opportunity to check them out, get the cars off the shelf, or just shake the rust off as we get ready to the Full Fall Schedule starting next month!
More info available here:
www.sidewinderz.com/event/1-28th-on-road-racing-romeoville-2/
I was like yeah!!! Then saw 1/28 and was like y....... Just kidding. Too many choices.......
Just what you guys need
Senna approved👍🏻
IMPORTANT ANNOUNCEMENT!
Due to an unforeseen schedule conflict we are rescheduling the 1/10th Outdoor On-Road Race Event from 8/18 to 8/25.
Apologies for any inconvenience this may have caused.
Please spread the word to anyone you know who might be planning to come out that day.
Thanks!
Ok. Hope things are good.
Interesting perspective on On-Road drivers.
youtu.be/YxxzNO6QPys
youtu.be/R950Ear4AikRace day #5. I had done major changes to the BT4. First really since started racing it. Wasn’t sure how today would go. It’s better but not right. Back end s...
Say no to shelf queens. We know there out there. It’s sitting on a shelf, in the garage, basement or closets. Bring them outside.
More racing performance goodness to pass along your way, from our buds at 1up RacingOur 1up Racing Blue O-Ring Grease is dialed for all types of shocks. Whether it’s for an on-road or off-road vehicle, it’s bound to keep your shocks moving freely and maintain a great seal.
Billy Kelly...is this you!?!? Lol
I think the real answer though is, still not enough! 😂
27.....Billy lied.
Could probably put a 1 in front of that 27 for total owned. I know I passed the 100 mark two years ago I think...
Answer is still not enough!!
We know a lot of USGT Drivers have been anxiously awaiting for this one!** NEW RELEASE **
The body #USGT racers have been waiting for.
PROTOform is proud to bring the Ford® GT to 190mm Touring Cars.
From the ultra-low stance, to the teardrop-shaped cockpit, to the never-before-seen b-pillar “side wings”, the Ford® GT is the ultimate expression of form following function. PROTOform has captured every detail of this mid-engine sportscar that captured GT class wins at the 2016 24h of Le Mans and back-to-back 24h of Daytona in 2017 and 2018.
This officially-licensed body should be in stock early next week at www.racepf.com. For more info or to place it on your Watch List, head over to racepf.com/touring-car-190mm/ford-gt-clear-body.asp
#RacePF 🏁
Ford Performance 🇺🇲️
#USGT
F1 drivers...** NEW RELEASE **
Introducing our next-generation front wing for your 1:10 F1 car, designed for versatility, drivability and unmistakable style.
The #V2 F1 Front Wing features 3-way adjustability to suit any condition your track throws at you: a low-downforce option, a medium downforce with 1-element add-on winglet, or a high-downforce, 2-element add-on winglet for maximum steering feel. The tall wing endplates enhance straight-line stability and side-bite in long sweepers. Inspired by popular American open-wheel cars from the late 90s, we also incorporated additional ground clearance at the outer extremities, especially important on U.S. style high-grip carpet. A wide, flat section in the middle of the wing provides a perfect mating surface for any F1 body.
The wings are made from sleek, matte-finished, ultra-durable nylon and will fit most popular F1 cars on the market such as Xray, AE, Tamiya and Roche. They are available in black color now, with a white option coming soon.
For more info or to buy now:
www.racepf.com/formula-1/protoform-v2-f1-front-wing-black.asp
#RacePF
Can’t wait to try mine out in a few weeks.... 😳
And they finally have the Ford GT body coming.
Looks like it will have high downforce with this new wing. Can’t wait to try out later this month(aug).
Another great quality product from our friends at MOTIV RC!!NEW PRODUCT!!
MOTIV Universal Motor Bearing Tool (All brands)
What makes this bearing tool special is its ability to adapt to any design motor and also that it can be completely rebuilt to replace any part necessary in the event that something strips or gets bent. Included are three different cup sizes which will allow you to choose the proper place on your sensor unit or end bell to apply the pressure necessary when installing new bearings. This results in greatly reducing the chance of motor damage during bearing installation.
FIRST 50 UNITS SOLD INCLUDES ONE FREE PAIR OF AXON BEARINGS, A $12.49 VALUE.
AVAILABLE NOW
www.teamgravityrc.com/ACCESSORIES-c15430088
1/10th On-Road Racing continues this Saturday, August 4th at HobbyTown!
We need to finish out the season strong, so let's see those cars out there and have some fun!
More info available here:
www.sidewinderz.com/event/1-10th-on-road-racing-hobbytown-orland-park-8/
Won’t make it, birthday party for Victoria at my house with family
I'll be there
Weather looks like it's going to be awesome!
Got our hands on a 1/28th Scale Jomurema J128-R01 Pro Brushless Kit and quickly got it built for a test run at our race event today.
This will be a hot car going into the 2018/2019 Indoor Season this Fall, with five racers already getting cars on the way.
Check it out!!!
Pretty awesome guys can't wait to get mine. Lots of Parts flowing in already just waiting for the chassis
All Things DEFY, fresh and back In stock!
www.teamgravityrc.com/DEFY-GREY-GRAPHENE-SERIES-LiPo-c15430089
Did you guys see this?
Fenix Racing 1960s F1 Race Kit
bigsquidrc.com
Being teased now by Italian company Fenix Racing is a new 1960s F1 Race Car Kit. The kit comes with an incredible looking old school F1 body, one that would look great on the track, or on the shelf. H...Showing some summer lovin’ next weekend for the 1/28 On-Road Racers before the full Fall schedule kicks in! See you there!! #sidewinderzracing #rcptracks #kyosho #pnracing #jomurema #rcatomic #glracing #futaba #sanwa #spektrumrc #ensotech #hobbywing #one28thracing #kyoshominiz
Countdown to Race Day is here!! Only one week away to the next event. The season is flying by fast so get outside with us and have some fun while you still can!!! Classes for all skill and interest levels!!! #sidewinderz #sidewinderzracing #hobbytownorland #2018raceseason
What classes do u run?
One of the most fun on-road tracks! Looking forward to racing with you guys next weekend.
Will u add a class is enough show up?
youtu.be/bwAyv30wNzMSerpent 4x. Overall good day. Improved by 20+ seconds from round 1-4.
Tomorrow is Race Day!! Going to be great weather!! Let’s see those cars out there and have some fun!!!
#sidewinderz #sidewinderzracing #hobbytownorland #2018raceseason
